Before installation, all components of the aluminum alloy tuyere should be thoroughly inspected. Whether the machine parts are complete, whether the rotation direction of the impeller and the casing are consistent, whether the connections between the parts are tight, whether the main parts such as the impeller, main shaft, bearings are damaged, whether the transmission group is flexible, etc. If problems are found, they should be repaired and adjusted immediately. Pay attention to the slot of the main shaft V-belt wheel and click the V-belt wheel. The protective cover is installed after the tape is put on to ensure safety. In addition, we also need to be careful not to install it wrong when installing the adjustment door of the aluminum alloy tuyere, so as to ensure that the direction of rotation of the impeller is the same as that of the impeller. After doing the above, we should also pay attention: after the installation of the aluminum alloy tuyere, test whether the transmission group is normal, make sure that there will be no problems such as over-tightening and collision of the fixed part, and find the problem and adjust it to the best state in time. I hope you can pay attention when installing the aluminum alloy tuyere to avoid loss.
When installing, pay attention to check the cabinet. There should be no falling tools and debris left in the shell. In order to prevent rust and reduce the difficulty of disassembly on some joint surfaces, some grease or mechanical oil should be applied. When connecting with the foundation, the inlet and outlet air ducts should be adjusted to match them naturally, and they must not be forcibly connected, and the weight of the pipes should not be added to the components of the fan, and pay attention to ensure the horizontal position of the fan.
After the installation is complete, test whether the transmission group is normal, and make sure that there will be no problems such as over-tightening and collision of the fixed part. If you find the problem, you can adjust it to the best state in time. I hope you can pay attention when installing the aluminum alloy tuyere. Avoid causing losses.